|
European Research on Management and Business Economics |
![]() |
|
European Research on Management and Business Economics (ERMBE)
Electronic ISSN:
|
|
Guide for authors
|
![]() IntroductionIntroduction
European Research on Management and Business Economics (ERMBE)
was born in 1995 as Investigaciones Europeas de Dirección y Economía de
la Empresa (IEDEE) and it is edited by the European Academy of
Management and Business Economics (AEDEM).
ERMBE publishes three issues per year (January, May, and September). From the beginning, the aim of the Journal is to foster academic research by publishing original research articles that meet the highest analytical standards, and provide new insights that contribute and spread the business management knowledge. ERMBE is an international peer-reviewed open access journal. The articles published are related with any specialities in the fields of the Business Economics (accounting, business management, finance, human resource management, marketing, operations management, organization theory, strategic management, etc.). The target audience is constituted by academics and researchers belonging to any university and by professionals and executives from the business world. Contact details for submission
You can send your manuscript at
https://www.editorialmanager.com/ERMBE/default.aspx Submission checklist
You
can use this list to carry out a final check of your submission before
you send it to the journal for review. Please check the relevant section
in this Guide for Authors for more details. Ensure that the following items are present: One author has been designated as the corresponding author with contact details: • E-mail address • Full postal address All necessary files have been uploaded: Manuscript: • Include keywords and JEL classification codes • All figures (include relevant captions) • All tables (including titles, description, footnotes) • Ensure all figure and table citations in the text match the files provided Supplemental files (where applicable) Further considerations • Manuscript has been 'spell checked' and 'grammar checked' • All references mentioned in the Reference List are cited in the text, and vice versa • Permission has been obtained for use of copyrighted material from other sources (including the Internet) • Relevant declarations of interest have been made • Journal policies detailed in this guide have been reviewed • Referee suggestions and contact details provided, based on journal requirements For further information, visit our Support Center.
Before you begin
Ethics in publishing
Please see our information on
Ethics in publishing. Declaration of interest
All
authors must disclose any financial and personal relationships with
other people or organizations that could inappropriately influence
(bias) their work. Examples of potential competing interests include
employment, consultancies, stock ownership, honoraria, paid expert
testimony, patent applications/registrations, and grants or other
funding. Authors must disclose any interests in two places: 1. A summary
declaration of interest statement in the title page file (if double
anonymized) or the manuscript file (if single anonymized). If there are
no interests to declare then please state this: 'Declarations of
interest: none'. 2. Detailed disclosures as part of a separate
Declaration of Interest form, which forms part of the journal's official
records. It is important for potential interests to be declared in both
places and that the information matches.
More information. Declaration of generative AI in scientific writing
The
below guidance only refers to the writing process, and not to the use
of AI tools to analyse and draw insights from data as part of the
research process. Where authors use generative artificial intelligence (AI) and AI-assisted technologies in the writing process, authors should only use these technologies to improve readability and language. Applying the technology should be done with human oversight and control, and authors should carefully review and edit the result, as AI can generate authoritative-sounding output that can be incorrect, incomplete or biased. AI and AI-assisted technologies should not be listed as an author or co-author, or be cited as an author. Authorship implies responsibilities and tasks that can only be attributed to and performed by humans, as outlined in Elsevier's AI policy for authors. Authors should disclose in their manuscript the use of AI and AI-assisted technologies in the writing process by following the instructions below. A statement will appear in the published work. Please note that authors are ultimately responsible and accountable for the contents of the work. Disclosure instructions Authors must disclose the use of generative AI and AI-assisted technologies in the writing process by adding a statement at the end of their manuscript in the core manuscript file, before the References list. The statement should be placed in a new section entitled 'Declaration of Generative AI and AI-assisted technologies in the writing process' Statement: During the preparation of this work the author(s) used [NAME TOOL / SERVICE] in order to [REASON]. After using this tool/service, the author(s) reviewed and edited the content as needed and take(s) full responsibility for the content of the publication This declaration does not apply to the use of basic tools for checking grammar, spelling, references etc. If there is nothing to disclose, there is no need to add a statement. Submission declaration and verification
Submission
of an article implies that the work described has not been published
previously (except in the form of an abstract, a published lecture or
academic thesis, see 'Multiple, redundant or concurrent publication'
for more information), that it is not under consideration for
publication elsewhere, that its publication is approved by all authors
and tacitly or explicitly by the responsible authorities where the work
was carried out, and that, if accepted, it will not be published
elsewhere in the same form, in English or in any other language,
including electronically without the written consent of the
copyright-holder. To verify compliance, your article may be checked by
Crossref Similarity Check and other originality or duplicate checking software. Preprints
Please note that preprints can be shared anywhere at any time, in line with Elsevier's
sharing policy. Sharing your preprints e.g. on a preprint server will not count as prior publication (see 'Multiple, redundant or concurrent publication' for more information). Use of inclusive language
Inclusive
language acknowledges diversity, conveys respect to all people, is
sensitive to differences, and promotes equal opportunities. Content
should make no assumptions about the beliefs or commitments of any
reader; contain nothing which might imply that one individual is
superior to another on the grounds of age, gender, race, ethnicity,
culture, sexual orientation, disability or health condition; and use
inclusive language throughout. Authors should ensure that writing is
free from bias, stereotypes, slang, reference to dominant culture and/or
cultural assumptions. We advise to seek gender neutrality by using
plural nouns ("clinicians, patients/clients") as default/wherever
possible to avoid using "he, she," or "he/she." We recommend avoiding
the use of descriptors that refer to personal attributes such as age,
gender, race, ethnicity, culture, sexual orientation, disability or
health condition unless they are relevant and valid. When coding
terminology is used, we recommend to avoid offensive or exclusionary
terms such as "master", "slave", "blacklist" and "whitelist". We suggest
using alternatives that are more appropriate and (self-) explanatory
such as "primary", "secondary", "blocklist" and "allowlist". These
guidelines are meant as a point of reference to help identify
appropriate language but are by no means exhaustive or definitive. Reporting sex- and gender-based analyses
Reporting guidance For research involving or pertaining to humans, animals or eukaryotic cells, investigators should integrate sex and gender-based analyses (SGBA) into their research design according to funder/sponsor requirements and best practices within a field. Authors should address the sex and/or gender dimensions of their research in their article. In cases where they cannot, they should discuss this as a limitation to their research's generalizability. Importantly, authors should explicitly state what definitions of sex and/or gender they are applying to enhance the precision, rigor and reproducibility of their research and to avoid ambiguity or conflation of terms and the constructs to which they refer (see Definitions section below). Authors can refer to the Sex and Gender Equity in Research (SAGER) guidelines and the SAGER guidelines checklist. These offer systematic approaches to the use and editorial review of sex and gender information in study design, data analysis, outcome reporting and research interpretation - however, please note there is no single, universally agreed-upon set of guidelines for defining sex and gender. Definitions Sex generally refers to a set of biological attributes that are associated with physical and physiological features (e.g., chromosomal genotype, hormonal levels, internal and external anatomy). A binary sex categorization (male/female) is usually designated at birth ("sex assigned at birth"), most often based solely on the visible external anatomy of a newborn. Gender generally refers to socially constructed roles, behaviors, and identities of women, men and gender-diverse people that occur in a historical and cultural context and may vary across societies and over time. Gender influences how people view themselves and each other, how they behave and interact and how power is distributed in society. Sex and gender are often incorrectly portrayed as binary (female/male or woman/man) and unchanging whereas these constructs actually exist along a spectrum and include additional sex categorizations and gender identities such as people who are intersex/have differences of sex development (DSD) or identify as non-binary. Moreover, the terms "sex" and "gender" can be ambiguous--thus it is important for authors to define the manner in which they are used. In addition to this definition guidance and the SAGER guidelines, the resources on this page offer further insight around sex and gender in research studies. Author contributions
For
transparency, we require corresponding authors to provide co-author
contributions to the manuscript using the relevant CRediT roles. The
CRediT taxonomy
includes 14 different roles describing each contributor's specific
contribution to the scholarly output. The roles are: Conceptualization;
Data curation; Formal analysis; Funding acquisition; Investigation;
Methodology; Project administration; Resources; Software; Supervision;
Validation; Visualization; Roles/Writing - original draft; and Writing -
review & editing. Note that not all roles may apply to every
manuscript, and authors may have contributed through multiple roles.
More details and an example. Changes to authorship
Authors are expected to consider carefully the list and order of authors
before
submitting
their manuscript and provide the definitive list of authors at the time
of the original submission. Any addition, deletion or rearrangement of
author names in the authorship list should be made only
before
the manuscript has been accepted and only if approved by the journal
Editor. To request such a change, the Editor must receive the following
from the corresponding author: (a) the reason for the change in
author list and (b) written confirmation (e-mail, letter) from all
authors that they agree with the addition, removal or rearrangement. In
the case of addition or removal of authors, this includes confirmation
from the author being added or removed. Only in exceptional circumstances will the Editor consider the addition, deletion or rearrangement of authors after the manuscript has been accepted. While the Editor considers the request, publication of the manuscript will be suspended. If the manuscript has already been published in an online issue, any requests approved by the Editor will result in a corrigendum. Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (see
more information
on this). An e-mail will be sent to the corresponding author confirming
receipt of the manuscript together with a 'Journal Publishing
Agreement' form or a link to the online version of this agreement. Author rights As an author you (or your employer or institution) have certain rights to reuse your work. More information. Responsible sharing
Find out how you can
share your research published in Elsevier journals. Funding source
You
are requested to identify who provided financial support for the
conduct of the research and/or preparation of the article and to briefly
describe the role of the sponsor(s), if any, in study design; in the
collection, analysis and interpretation of data; in the writing of the
report; and in the decision to submit the article for publication. If
the funding source(s) had no such involvement, it is recommended to
state this. Open access
Please visit our
Open Access page for more information about open access publishing in this journal. Elsevier Researcher Academy
Researcher Academy
is a free e-learning platform designed to support early and mid-career
researchers throughout their research journey. The "Learn" environment
at Researcher Academy offers several interactive modules, webinars,
downloadable guides and resources to guide you through the process of
writing for research and going through peer review. Feel free to use
these free resources to improve your submission and navigate the
publication process with ease. Language
Please
write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who feel their English language
manuscript may require editing to eliminate possible grammatical or
spelling errors and to conform to correct scientific English may wish to
use the
Language Editing service available from Elsevier's Language Services. Submission
Our
online submission system guides you stepwise through the process of
entering your article details and uploading your files. The system
converts your article files to a single PDF file used in the peer-review
process. Editable files (e.g., Word, LaTeX) are required to typeset
your article for final publication. All correspondence, including
notification of the Editor's decision and requests for revision, is sent
by e-mail. Submit your article
Please submit your article via
https://www.editorialmanager.com/ERMBE/default.aspx Suggesting reviewers
Please submit the names and institutional e-mail addresses of several potential reviewers. You should not suggest reviewers who are colleagues, or who have co-authored or collaborated with you during the last three years. Editors do not invite reviewers who have potential competing interests with the authors. Further, in order to provide a broad and balanced assessment of the work, and ensure scientific rigor, please suggest diverse candidate reviewers who are located in different countries/regions from the author group. Also consider other diversity attributes e.g. gender, race and ethnicity, career stage, etc. Finally, you should not include existing members of the journal's editorial team, of whom the journal are already aware. Note: the editor decides whether or not to invite your suggested reviewers. PreparationDouble anonymized review
This
journal uses double anonymized review, which means the identities of
the authors are concealed from the reviewers, and vice versa.
More information is available on our website. To facilitate this, please include the following separately: Title page (with author details): This should include the title, authors' names, affiliations, acknowledgements and any Declaration of Interest statement, and a complete address for the corresponding author including an e-mail address. Anonymized manuscript (no author details): The main body of the paper (including the references, figures, tables and any acknowledgements) should not include any identifying information, such as the authors' names or affiliations. Use of word processing software
It
is important that the file be saved in the native format of the word
processor used. The text should be in single-column format. Keep the
layout of the text as simple as possible. Most formatting codes will be
removed and replaced on processing the article. In particular, do not
use the word processor's options to justify text or to hyphenate words.
However, do use bold face, italics, subscripts, superscripts etc. When
preparing tables, if you are using a table grid, use only one grid for
each individual table and not a grid for each row. If no grid is used,
use tabs, not spaces, to align columns. The electronic text should be
prepared in a way very similar to that of conventional manuscripts (see
also the
Guide to Publishing with Elsevier.
Note that source files of figures, tables and text graphics will be
required whether or not you embed your figures in the text. See also the
section on Electronic artwork. To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your word processor. Article structure
This section describes the article structure for this journal. Sections
Divide
your article into clearly defined and numbered sections. Subsections
should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract
is not included in section numbering). Use this numbering also for
internal cross-referencing: do not just refer to 'the text'. Any
subsection may be given a brief heading. Each heading should appear on
its own separate line. Introduction
State
the objectives of the work and provide an adequate background, avoiding
a detailed literature survey or a summary of the results. Material and methods
Provide
sufficient details to allow the work to be reproduced by an independent
researcher. Methods that are already published should be summarized,
and indicated by a reference. If quoting directly from a previously
published method, use quotation marks and also cite the source. Any
modifications to existing methods should also be described. Theory/calculation
A
Theory section should extend, not repeat, the background to the article
already dealt with in the Introduction and lay the foundation for
further work. In contrast, a Calculation section represents a practical
development from a theoretical basis. Results
Results should be clear and concise. Discussion
This
should explore the significance of the results of the work, not repeat
them. A combined Results and Discussion section is often appropriate.
Avoid extensive citations and discussion of published literature. Conclusions
The
main conclusions of the study may be presented in a short Conclusions
section, which may stand alone or form a subsection of a Discussion or
Results and Discussion section. Essential title page information
Abstract
A
concise and factual abstract is required. The abstract should state
briefly the purpose of the research, the principal results and major
conclusions. An abstract is often presented separately from the article,
so it must be able to stand alone. For this reason, References should
be avoided, but if essential, then cite the author(s) and year(s). Also,
non-standard or uncommon abbreviations should be avoided, but if
essential they must be defined at their first mention in the abstract
itself. Keywords
Immediately
after the abstract, provide a maximum of5 keywords, using British
spelling and avoiding general and plural terms and multiple concepts
(avoid, for example, 'and', 'of'). Be sparing with abbreviations: only
abbreviations firmly established in the field may be eligible. These
keywords will be used for indexing purposes. Classification codes
Please provide up to5 standard JEL codes. The available codes may be accessed at
JEL. Abbreviations
Define
abbreviations that are not standard in this field in a footnote to be
placed on the first page of the article. Such abbreviations that are
unavoidable in the abstract must be defined at their first mention
there, as well as in the footnote. Ensure consistency of abbreviations
throughout the article. Acknowledgements
Collate
acknowledgements in a separate section at the end of the article before
the references and do not, therefore, include them on the title page,
as a footnote to the title or otherwise. List here those individuals who
provided help during the research (e.g., providing language help,
writing assistance or proof reading the article, etc.). Formatting of funding sources
List funding sources in this standard way to facilitate compliance to funder's requirements: Funding: This work was supported by the National Institutes of Health [grant numbers xxxx, yyyy]; the Bill & Melinda Gates Foundation, Seattle, WA [grant number zzzz]; and the United States Institutes of Peace [grant number aaaa]. It is not necessary to include detailed descriptions on the program or type of grants and awards. When funding is from a block grant or other resources available to a university, college, or other research institution, submit the name of the institute or organization that provided the funding. If no funding has been provided for the research, it is recommended to include the following sentence: This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors. Units
Follow
internationally accepted rules and conventions: use the international
system of units (SI). If other units are mentioned, please give their
equivalent in SI. Artwork
This section describes the artwork for this journal. Electronic artwork
General points
A detailed guide on electronic artwork is available. You are urged to visit this site; some excerpts from the detailed information are given here. Formats If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is' in the native document format. Regardless of the application used other than Microsoft Office, when your electronic artwork is finalized, please 'Save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below): EPS (or PDF): Vector drawings, embed all used fonts. TIFF (or JPEG): Color or grayscale photographs (halftones), keep to a minimum of 300 dpi. TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi. TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of 500 dpi. Please do not:
Color artwork
Please
make sure that artwork files are in an acceptable format (TIFF (or
JPEG), EPS (or PDF) or MS Office files) and with the correct resolution.
If, together with your accepted article, you submit usable color
figures then Elsevier will ensure, at no additional charge, that these
figures will appear in color online (e.g., ScienceDirect and other
sites).
Further information on the preparation of electronic artwork. Figure captions
Ensure
that each illustration has a caption. Supply captions separately, not
attached to the figure. A caption should comprise a brief title (not
on the figure itself) and a description of the illustration. Keep text
in the illustrations themselves to a minimum but explain all symbols and
abbreviations used. Text graphics
Text graphics may be embedded in the text at the appropriate position. See further under Electronic artwork. Tables
Please
submit tables as editable text and not as images. Tables can be placed
either next to the relevant text in the article, or on separate page(s)
at the end. Number tables consecutively in accordance with their
appearance in the text and place any table notes below the table body.
Be sparing in the use of tables and ensure that the data presented in
them do not duplicate results described elsewhere in the article. Please
avoid using vertical rules and shading in table cells. References
This section describes the references for this journal. Citation in text
Please
ensure that every reference cited in the text is also present in the
reference list (and vice versa). Any references cited in the abstract
must be given in full. Unpublished results and personal communications
are not recommended in the reference list, but may be mentioned in the
text. If these references are included in the reference list they should
follow the standard reference style of the journal and should include a
substitution of the publication date with either 'Unpublished results'
or 'Personal communication'. Citation of a reference as 'in press'
implies that the item has been accepted for publication. Reference links
Increased
discoverability of research and high quality peer review are ensured by
online links to the sources cited. In order to allow us to create links
to abstracting and indexing services, such as Scopus, Crossref and
PubMed, please ensure that data provided in the references are correct.
Please note that incorrect surnames, journal/book titles, publication
year and pagination may prevent link creation. When copying references,
please be careful as they may already contain errors. Use of the DOI is
highly encouraged. A DOI is guaranteed never to change, so you can use it as a permanent link to any electronic article. An example of a citation using DOI for an article not yet in an issue is: VanDecar J.C., Russo R.M., James D.E., Ambeh W.B., Franke M. (2003). Aseismic continuation of the Lesser Antilles slab beneath northeastern Venezuela. Journal of Geophysical Research, https://doi.org/10.1029/2001JB000884. Please note the format of such citations should be in the same style as all other references in the paper. Web references
As
a minimum, the full URL should be given and the date when the reference
was last accessed. Any further information, if known (DOI, author
names, dates, reference to a source publication, etc.), should also be
given. Web references can be listed separately (e.g., after the
reference list) under a different heading if desired, or can be included
in the reference list. Data references
This
journal encourages you to cite underlying or relevant datasets in your
manuscript by citing them in your text and including a data reference in
your Reference List. Data references should include the following
elements: author name(s), dataset title, data repository, version (where
available), year, and global persistent identifier. Add [dataset]
immediately before the reference so we can properly identify it as a
data reference. The [dataset] identifier will not appear in your
published article. Preprint references
Where
a preprint has subsequently become available as a peer-reviewed
publication, the formal publication should be used as the reference. If
there are preprints that are central to your work or that cover crucial
developments in the topic, but are not yet formally published, these may
be referenced. Preprints should be clearly marked as such, for example
by including the word preprint, or the name of the preprint server, as
part of the reference. The preprint DOI should also be provided. References in a special issue
Please
ensure that the words 'this issue' are added to any references in the
list (and any citations in the text) to other articles in the same
Special Issue. Reference style
Text: Citations
in the text should follow the referencing style used by the American
Psychological Association. You are referred to the Publication Manual of
the American Psychological Association, Seventh Edition, ISBN
978-1-4338-3215-4, copies of which may be ordered online. List: references should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters 'a', 'b', 'c', etc., placed after the year of publication. Examples: Reference to a journal publication: Van der Geer, J., Hanraads, J. A. J., & Lupton, R. A. (2010). The art of writing a scientific article. Journal of Scientific Communications, 163, 51-59. https://doi.org/10.1016/j.sc.2010.00372. Reference to a journal publication with an article number: Van der Geer, J., Hanraads, J. A. J., & Lupton, R. A. (2018). The art of writing a scientific article. Heliyon, 19, Article e00205. https://doi.org/10.1016/j.heliyon.2018.e00205. Reference to a book: Strunk, W., Jr., & White, E. B. (2000). The elements of style (4th ed.). Longman (Chapter 4). Reference to a chapter in an edited book: Mettam, G. R., & Adams, L. B. (2009). How to prepare an electronic version of your article. In B. S. Jones, & R. Z. Smith (Eds.), Introduction to the electronic age (pp. 281-304). E-Publishing Inc. Reference to a website: Powertech Systems. (2015). Lithium-ion vs lead-acid cost analysis. Retrieved from http://www.powertechsystems.eu/home/tech-corner/lithium-ion-vs-lead- acid-cost-analysis/. Accessed January 6, 2016 Reference to a dataset: [dataset] Oguro, M., Imahiro, S., Saito, S., & Nakashizuka, T. (2015). Mortality data for Japanese oak wilt disease and surrounding forest compositions. Mendeley Data, v1. https://doi.org/10.17632/xwj98nb39r.1. Reference to a conference paper or poster presentation: Engle, E.K., Cash, T.F., & Jarry, J.L. (2009, November). The Body Image Behaviours Inventory-3: Development and validation of the Body Image Compulsive Actions and Body Image Avoidance Scales. Poster session presentation at the meeting of the Association for Behavioural and Cognitive Therapies, New York, NY. Reference to software: Coon, E., Berndt, M., Jan, A., Svyatsky, D., Atchley, A., Kikinzon, E., Harp, D., Manzini, G., Shelef, E., Lipnikov, K., Garimella, R., Xu, C., Moulton, D., Karra, S., Painter, S., Jafarov, E., & Molins, S. (2020, March 25). Advanced Terrestrial Simulator (ATS) v0.88 (Version 0.88). Zenodo. https://doi.org/10.5281/zenodo.3727209. Journal abbreviations
Journal names should be abbreviated according to the
List of Title Word Abbreviations. Video
Elsevier
accepts video material and animation sequences to support and enhance
your scientific research. Authors who have video or animation files that
they wish to submit with their article are strongly encouraged to
include links to these within the body of the article. This can be done
in the same way as a figure or table by referring to the video or
animation content and noting in the body text where it should be placed.
All submitted files should be properly labeled so that they directly
relate to the video file's content. In order to ensure that your video
or animation material is directly usable, please provide the file in one
of our recommended file formats with a preferred maximum size of 150 MB
per file, 1 GB in total. Video and animation files supplied will be
published online in the electronic version of your article in Elsevier
Web products, including ScienceDirect.
Please supply 'stills' with your files: you can choose any frame from
the video or animation or make a separate image. These will be used
instead of standard icons and will personalize the link to your video
data. For more detailed instructions please visit our
video instruction pages.
Note: since video and animation cannot be embedded in the print version
of the journal, please provide text for both the electronic and the
print version for the portions of the article that refer to this
content. Supplementary material
Supplementary
material such as applications, images and sound clips, can be published
with your article to enhance it. Submitted supplementary items are
published exactly as they are received (Excel or PowerPoint files will
appear as such online). Please submit your material together with the
article and supply a concise, descriptive caption for each supplementary
file. If you wish to make changes to supplementary material during any
stage of the process, please make sure to provide an updated file. Do
not annotate any corrections on a previous version. Please switch off
the 'Track Changes' option in Microsoft Office files as these will
appear in the published version. Research data
This
journal encourages and enables you to share data that supports your
research publication where appropriate, and enables you to interlink the
data with your published articles. Research data refers to the results
of observations or experimentation that validate research findings,
which may also include software, code, models, algorithms, protocols,
methods and other useful materials related to the project. Below are a number of ways in which you can associate data with your article or make a statement about the availability of your data when submitting your manuscript. If you are sharing data in one of these ways, you are encouraged to cite the data in your manuscript and reference list. Please refer to the "References" section for more information about data citation. For more information on depositing, sharing and using research data and other relevant research materials, visit the research data page.
After acceptanceProofs
One
set of page proofs (as PDF files) will be sent by e-mail to the
corresponding author (if we do not have an e-mail address then paper
proofs will be sent by post) or a link will be provided in the e-mail so
that authors can download the files themselves. To ensure a fast
publication process of the article, we kindly ask authors to provide us
with their proof corrections within two days. Elsevier now provides
authors with PDF proofs which can be annotated; for this you will need
to download the free Adobe Reader,
version 9 (or higher). Instructions on how to annotate PDF files will
accompany the proofs (also given online). The exact system requirements
are given at the
Adobe site.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and scan the pages and return via e-mail. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Offprints
The corresponding author will be notified and receive a link to the published version of the open access article on
ScienceDirect.
This link is in the form of an article DOI link which can be shared via
email and social networks. For an extra charge, paper offprints can be
ordered via the offprint order form which is sent once the article is
accepted for publication.
Author inquiriesAuthor Inquiries
Visit the
Elsevier Support Center to find the answers you need. Here you will find everything from Frequently Asked Questions to ways to get in touch. You can also check the status of your submitted article or find out when your accepted article will be published. |
|
ERMBE and IEDEE articles are free available on internet. Any user is able to read, download, copy, distribute, print, search, or link to the full texts of these articles. Any usage of the papers published in the journal requires the inclusion of the full citation of the article in ERMBE or IEDEE.
|